NAVY A-A-50634-1995 LUBRICATING OIL ESTER-BASED FOR COMPRESSORS USING HFC-134A REFRIGERANT《HFC-134A型制冷压缩机用酯基润滑油》.pdf

上传人:deputyduring120 文档编号:976331 上传时间:2019-03-13 格式:PDF 页数:5 大小:187.84KB
下载 相关 举报
NAVY A-A-50634-1995 LUBRICATING OIL ESTER-BASED FOR COMPRESSORS USING HFC-134A REFRIGERANT《HFC-134A型制冷压缩机用酯基润滑油》.pdf_第1页
第1页 / 共5页
NAVY A-A-50634-1995 LUBRICATING OIL ESTER-BASED FOR COMPRESSORS USING HFC-134A REFRIGERANT《HFC-134A型制冷压缩机用酯基润滑油》.pdf_第2页
第2页 / 共5页
NAVY A-A-50634-1995 LUBRICATING OIL ESTER-BASED FOR COMPRESSORS USING HFC-134A REFRIGERANT《HFC-134A型制冷压缩机用酯基润滑油》.pdf_第3页
第3页 / 共5页
NAVY A-A-50634-1995 LUBRICATING OIL ESTER-BASED FOR COMPRESSORS USING HFC-134A REFRIGERANT《HFC-134A型制冷压缩机用酯基润滑油》.pdf_第4页
第4页 / 共5页
NAVY A-A-50634-1995 LUBRICATING OIL ESTER-BASED FOR COMPRESSORS USING HFC-134A REFRIGERANT《HFC-134A型制冷压缩机用酯基润滑油》.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、A-A-50 63 4 E 9999Li 0366857 T57 .I A-A- 50634 28 February 1995 COMMERCIAL ITEM DESCRIPTION LUBRICATING OIL, ESTER-BASED, FOR COMPRESSORS USING HFC-134a REFRIGERANT The General Services Administration has authorized the use of this commercial item description. Abstract. This commercial item descript

2、ion (CID) covers polyolester-based lubricating oils for Navy compressors using HFC-134a refrigerant. Salient Characteristics. 1. Composition. The lubricating oil shall be a stable homogeneous blend of polyolester base stock and additives as necessary to meet the required characteristics. 2. Viscosit

3、y. The oil shall have a viscosity of 61.2-74.8 cSt at 40C and greater than or equal to 6.0 cSt at 100C when tested in accordance with ASTM D 445. 3. Pour Point. The pour point of the oil shall be less than or equal to -30C when tested in accordance with ASTM D 97. 4. Flash Point. The flash point of

4、the oil shall be greater than or equal to 180C when tested in accordance with ASTM D 92. 5. Miscibility. The oil and HFC-134a shall have a critical solution temperature of less than or equal to -35C. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of u

5、se in improving this document should be addressed to : Commander, Naval Sea Systems Command, SEA 03R42, 2531 Jefferson Davis Hwy, Arlington, VA, Cocument improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 9150 DISTRIBUTION STATEMENT A. Approved for p

6、ublic release; distribution is unlimited. Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 O 639 9999974 0366858 993 A-A-50634 6. Stability, sealed tube. After testing in accordance with ASHRAE 97 for 14

7、days at 175C in a sealed tube containing 1000 ppm distilled water, aluminum, steel, copper, and babbitt (Navy grade 2) coupons, 50% mixtures of oil plus liquid HFC-134a and oil plus liquid CFC-12 shall exhibit the following: (a) a colorless or light yellow, single phase oil/refrigerant mixture; (b)

8、clean and bright (or only partially dull) metal coupons with no deposits; Partially dull means that although the coupon is no longer completely bright and shiny, the coupon is not 100% dulled and it shows no indication of major darkening, pitting or rust. (c) less than or equal to 0.01% HFC-134a dec

9、omposition; and (d) HCFC-22 from decomposition of CFC-12 shall be less than 2.5% or fluoride and chloride shall be less than 100 ppm each. 7. Stability, oxidative and hydrolytic. The acid number of the oil shall not exceed 10 mg KOH/g when tested for 250 hours in accordance with ASTM D943. 8, Stabil

10、ity, storage. The oil shall meet all salient characteristics Those oils not meeting after one year storage in its container at 75 revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the CID requirements. Castro

11、l Icematic SW 68: available from Castrol Inc., Specialty Products Division, 16715 Von Karman Ave., Sute 230, Irvine, CA 92714, ph 714- 660- 9414 Mobil Arctic EAL 68: available from Mobil Oil Corporation, 3225 Gallows Rd., Fairfax, VA 22037-0001, ph 800-662-4525 4 Provided by IHSNot for ResaleNo repr

12、oduction or networking permitted without license from IHS-,-,-A-A-50634 W 9999974 L668bL 488 A-A- 50634 Test Methods and Standards. ASTM methods are available from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103. ASHRAE Standard 97 is available from the Ameri

13、can Society of Heating, Refrigerating, and Air-conditioning Engineers, 1791 Tullie Circle, NE, Atlanta, GA 30329. Federal standards are available from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, 5094. CIVIL AGENCY Philadelphia, PA 19111- COORDINATING ACTIVITIES GSA-FSS REVIEW ACTIVITY: DLA-GS PREPARING ACTIVITY: NAVY- SH PROJECT (9150-N822) 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN 52296-1989 Glass and glass ceramics hydrolytic resistance of the surface of glass and glass ceramic plates at 98 C method of test and classification《玻璃和玻璃陶瓷 98℃时玻璃和玻璃陶瓷板表面的耐水解性.pdf DIN 52296-1989 Glass and glass ceramics hydrolytic resistance of the surface of glass and glass ceramic plates at 98 C method of test and classification《玻璃和玻璃陶瓷 98℃时玻璃和玻璃陶瓷板表面的耐水解性.pdf
  • DIN 52298-1-1998 Road vehicles - Measurement of scattered light of safety glazing materials for vehicle glazing - Part 1 Annular diaphragm method《道路车辆 汽车安全玻璃光散射测定 第1部分 环形孔板法》.pdf DIN 52298-1-1998 Road vehicles - Measurement of scattered light of safety glazing materials for vehicle glazing - Part 1 Annular diaphragm method《道路车辆 汽车安全玻璃光散射测定 第1部分 环形孔板法》.pdf
  • DIN 52298-2-2003 Road vehicles - Measurement of scattered light of safety glazing materials for vehicle glazing - Part 2 Image-mapping method《道路车辆 汽车防撞安全玻璃散射光测量 第2部分 映射法》.pdf DIN 52298-2-2003 Road vehicles - Measurement of scattered light of safety glazing materials for vehicle glazing - Part 2 Image-mapping method《道路车辆 汽车防撞安全玻璃散射光测量 第2部分 映射法》.pdf
  • DIN 523-1974 Lathe Mandrels Mandrels for Workpiece-mounting《车床心轴 工件装夹用心轴》.pdf DIN 523-1974 Lathe Mandrels Mandrels for Workpiece-mounting《车床心轴 工件装夹用心轴》.pdf
  • DIN 52305-1995 Determination of the optical deviation and refractive power of safety glass for vehicle glazing《汽车安全玻璃光偏转角和折射值测定》.pdf DIN 52305-1995 Determination of the optical deviation and refractive power of safety glass for vehicle glazing《汽车安全玻璃光偏转角和折射值测定》.pdf
  • DIN 52307-1990 Dart drop test on safety glass for vehicle glazing《车辆安全玻璃沸水试验》.pdf DIN 52307-1990 Dart drop test on safety glass for vehicle glazing《车辆安全玻璃沸水试验》.pdf
  • DIN 52308-1984 Boil test on laminated glass《安全玻璃蒸煮试验》.pdf DIN 52308-1984 Boil test on laminated glass《安全玻璃蒸煮试验》.pdf
  • DIN 52310-2-2011 Headform impact test on safety glazing materials for road vehicles - Part 2 Test with deceleration measurement《道路车辆用安全玻璃材料的人头模型撞击试验 第2部分 减速测量试验》.pdf DIN 52310-2-2011 Headform impact test on safety glazing materials for road vehicles - Part 2 Test with deceleration measurement《道路车辆用安全玻璃材料的人头模型撞击试验 第2部分 减速测量试验》.pdf
  • DIN 52314-1977 Testing of glass tensile test for the determination of stress optical coefficient《玻璃的检验 拉伸试验中应力光学系数的测定》.pdf DIN 52314-1977 Testing of glass tensile test for the determination of stress optical coefficient《玻璃的检验 拉伸试验中应力光学系数的测定》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1