1、MIL-H-85047A(AS)AMENDMENT 330 April 2001SUPERSEDINGAMENDMENT 231 July 1987MILITARY SPECIFICATIONHELMET ASSEMBLY, HGU-34/PThis amendment forms a part of Military Specification MIL -H-85047A(AS), dated13 December 1979 and is approved by the Naval Air Systems Command, Department of the Navyand is avail
2、able for use by all Department and Agencies of the Department of Defense.By this amendment, “EEK-4/P” is changed to “EEK-4A/P” whe rever it appears in thisspecification.PAGE 3* 3.1: Delete.PAGE 43.5.1.4: Delete “1.70” and substitute “1.77” in line 2.Delete “1.75” and substitute “1.82” in line 3.PAGE
3、 53.5.2.2: Delete “0.60” and substitute “0.50”, and delete “.65” and substitute “0.55” in line 2.* 4.2a: Delete.AMSC N/A 1 of 2 FSC 8475DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited.INCH-POUNDINACTIVE FOR NEW DESIGN AFTER 18 SEPTEMBER 1996Provided by IHSNot for Re
4、saleNo reproduction or networking permitted without license from IHS-,-,-MIL-H-85047A(AS)AMENDMENT 32PAGE 6* 4.3: Delete.* Table II: Delete.PAGE 14* 6.2.1c: Delete and substitute:“c. When First Article is required (see 3.2).”PAGE 15* 6.3: Delete.NOTE: The margins of this amendment are marked with as
5、terisks to indicate where changes fromthe previous amendment were made. This was done as a convenience only and the Governmentassumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractorsare cautioned to evaluate the requirements of this document based on the entire contentirrespective of the marginal notations and relationship to the last previous amendment.Preparing activity:Navy - AS(Project No. 8475-0013)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
