1、QPL-322322013-08-09QUALIFIED PRODUCT LISTOFPRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATIONMIL-PRF-32232Universal Joint, Right Angle, Offset, Shipboard UseThis list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listi
2、ng of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to c
3、hange without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.The activity responsible for this QPL is Naval Sea Systems Command, 1333 Isaac Hull Ave. SE, Washington N
4、avy Yard, DC 20376-5160 or email commandstandardsnavy.mil.GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipTYPE II(FEMALE-ENDS), SIZE 1 1/4 INCHUJAC-1011-20 SERIES NSWC Letter Report Ser 669/207.D3613 of 10/22/2011 & Ser 954/1142 of 01/19/
5、201103705 M Green Until: 10-AUG-13NTYPE II(FEMALE-ENDS), SIZE 1 1/4 INCHUJAC-1011-20 SERIES 03705 P Green Until: 10-AUG-13NQPL-322321 of 2Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2013-08-09If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for Resa
6、leNo reproduction or networking permitted without license from IHS-,-,-Manufacturer/Supplier InformationCAGE CODE: 03705APEX TOOL GROUP, LLC 762 W STEWART ST DAYTON OH 45417-3971 USAhttp:/2 of 2Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2013-08-09If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
