NBN 52 084-1955 1250 《脂肪灰分含量，方法NBN 52 084》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 3371-1993 Modular units for machine tool construction Rotary tables and multi-sided centre bases for rotary tables《机床结构的组合键．旋转工作台和旋转工作台的多遍支持中心》.pdf

STAS SR ISO 3379-1996 Leather - Determination of distension and strength of grain - Ball burst test《皮革．粒面扩胀和胀破强度的测定．钢球顶破强力测试 》.pdf

STAS SR ISO 3386 1-1986 Polymeric materials cellular flexible Determination of stress-strain characteristics in compression Part 1 Low-density materials《高聚物多孔材料．压缩中应力应变特性的测定．第1部分：.pdf

STAS SR ISO 3400-1989 Cigarettes Determination of alkaloids in smoke condensates Spectrometric method《香烟．烟雾冷凝物光谱法对生物碱的测定》.pdf

STAS SR ISO 3435-1994 Continuous mechanical handling equipment - Classification and symbolization of bulk materials《连续机械搬运设备．分类和散装材料的符号表示 》.pdf

STAS SR ISO 3442-1996 Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) - Sizes for interchangeability and acceptance test specifications《机床用双爪自定心.pdf

STAS SR ISO 3458-1995 Assembled jpints between fittings polyethylene (PE) pressure pipes -Test of leakproofness under internal pressure《聚乙烯（PE）压力管材和管件间的组装街头．内压防漏测试 》.pdf

STAS SR ISO 3459-1995 Polyethylene (PE) pressure pipes - Joints assembled with mechanical fittings -Internal under-pressure test method and requirement《聚乙烯（PE）压力管道．用机械式管道装配的街头．内压测试.pdf

STAS SR ISO 3463-1995 Wheeled tractors for agriculture and forestry-Protective structures - Dynamic test method and acceptance conditions《农林．业轮式拖拉机．保护结构．动态测试法和验收条件 》.pdf