NBN B 11-203-1980 6250 《碎石试验和砾石，外形征象和平整石子的百分比》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 26399-1984 Tools for cold upset automatic machines Coning punches Construction and dimensions《自动冷镦机的工具 预镦冲头 结构及尺寸》.pdf

GOST 26400-1984 Tools for cold upset automatic machines Coning punches with injectors Construction and dimensions《自动冷镦机的工具 带顶出器的预镦冲头 结构及尺寸》.pdf

GOST 26401-1984 Tools for cold upset automatic machines Finishing punches Construction and dimensions《自动冷镦机的工具 精镦精头 结构及尺寸》.pdf

GOST 26402-1984 Tools for cold upset automatic machines Ejectors for bolt manufacturing tools Construction and dimensions《自动冷镦机的工具 制造螺栓用向工具送料器 结构及尺寸》.pdf

GOST 26403-1984 Tools for cold upset automatic machines Trim dies Construction and dimensions《自动冷镦机的工具 切断阴模 结构及尺寸》.pdf

GOST 26404-1984 Tools for cold upset automatic machines Trim punches Construction and dimensions《自动冷拔机的工具 切断冲头 结构及尺寸》.pdf

GOST 26405-1984 Tools for manufacturing bolts and nuts on cold heading machines General specifications《在自动冷镦机上制造螺栓和螺母用的工具 一般技术条件》.pdf

GOST 26406-1984 Porcelain and faience ware Method for determination of bending resistance《粗、细瓷器皿 抗弯曲强度测定方法》.pdf

GOST 26407-1984 Porcelain and faience ware Method for determination of impact resistance《粗、细瓷器皿 抗撞击强度测定方法》.pdf