NBN F 43-004-1986 8125 《焊接 用于点的焊接机器的电极的锥形装合 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 4493-1969 Specification for copper salts for electroplating《电镀用铜盐规范》.pdf

BS 4495-1969 Recommendations for the flame spraying of ceramic and cermet coatings《陶瓷和金属陶瓷度层的熔喷法推荐标准》.pdf

BS 4497-1969 Recommendations for the detection and estimation of nitrogenous treating agents in paper《纸质氮处理试剂的检测和评估推荐标准》.pdf

BS 450-1958 Specification for machine screws and machine screw nuts (B S W & B S F threads)《机用螺钉与机用螺母(B S W和 B S F螺纹)规范》.pdf

BS 4500-2009 Limits and fits - Guidance for system of cone (taper) fits and tolerances for cones from C = 1 3 to 1 500 lengths from 6 mm to 630 mm and diameters up to 500 mm《公差和配合 .pdf

BS 4500A-1970 ISO limits and fits - Data sheet selected ISO fits - hole basis《ISO极值与配合 数据表 选用的ISO配合－基孔制》.pdf

BS 4500B-1970 ISO limits and fits - Data sheet selected ISO fits - shaft basis《ISO极值与配合 数据表 选用的ISO配合－基轴制》.pdf

BS 4505-1-1981 Digital data transmission - Specification for basic mode control procedures《数字数据传输 第1部分 基本型控制程序规范》.pdf

BS 4505-2-1990 Digital data transmission - Character structure for start stop and synchronous transmission《数字数据传输 第2部分 起 止传输和同步传输用字符结构》.pdf