NBN T 03-017-1979 2500 《工业用硫酸，硫酸浓度的测定 密度测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 10360-3-2000 Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3 CMMs with the axis of a .pdf

DIN EN ISO 10360-4-2003 Geometrical Product Specifications (GPS) - Acceptance test and reverification tests for coordinate measuring machines (CMM) - Part 4 CMMs used in scanning m.pdf

DIN EN ISO 10360-5-2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5 CMMs using single and multip.pdf

DIN EN ISO 10360-6-2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 Estimation of errors in comp.pdf

DIN EN ISO 10360-7-2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging p.pdf

DIN EN ISO 10360-8-2014 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8 CMMs with optical distance se.pdf

DIN EN ISO 10360-9-2014 Geometrical product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9 CMMs with multiple probing sy.pdf

DIN EN ISO 10363-1995 Hot-melt adhesives - Determination of thermal stability (ISO 10363 1992) German version EN ISO 10363 1995《热熔粘合剂 热稳定性测定 (ISO 10363 1992) 德文版本 EN ISO 10363 1995.pdf

DIN EN ISO 10365-1995 Adhesives - Designation of main failure patterns (ISO 10365 1992) German version EN ISO 10365 1995《粘合剂 主要失效模式的标识 (ISO 10365 1992) 德文版本 EN ISO 10365 1995》.pdf