NBN T 03-128-1980 7500 Sodium hydroxide for industrial use - Determination of calcium content -EDTA (disodium sait) complexometric method《工业用氢氧化钠 钙含量的测定 乙二胺四乙酸（二钠盐）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 8230-3-2008 Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents (ISO 8230-3 2008)《干洗机的安全性要求 第3部分 用易燃溶剂的机械(ISO 8230-3-2008)》.pdf

BS EN ISO 8249-2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals《焊接 奥氏体和双重铁氧体奥氏体镍不锈钢焊接金属中铁素体数的测定》.pdf

BS EN ISO 8251-2011 Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings《铝和铝合金的阳极氧化 阳极氧化涂层耐磨性测量》.pdf

BS EN ISO 8253-1-2010 Acoustics Audiometric test methods Pure-tone air and bone conduction audiometry《声学 听力测定试验方法 纯音调空气和骨传导声测定》.pdf

BS EN ISO 8253-2-2009 Acoustics - Audiometric test methods - Sound field audiometry with pure-tone and narrow-band test signals《声学 听力试验方法 纯音和窄带试验信号声场测听方法》.pdf

BS EN ISO 8253-3-2012 Acoustics Audiometric test methods Speech audiometry《声学 听力测试方法 语言听力测定》.pdf

BS EN ISO 8254-1-2009 Paper and board - Measurement of specular gloss - 75 degree gloss with a converging beam TAPPI method《纸和纸板 镜面光泽度的测定 用TAPPI方法 会聚光束75角测定光泽度》.pdf

BS EN ISO 8254-2-2016 Paper and board Measurement of specular gloss 75 degree gloss with a parallel beam DIN method《纸和纸板 光泽度的测量 用平行光束的75度 DIN法》.pdf

BS EN ISO 8256-2004 Plastics - Determination of tensile-impact strength《塑料 拉伸冲击强度测定》.pdf