NBN-EN 20340-1993 9375 Conveyor belts Flame retardation Specifications and test method (ISO 340 1988)《传输带，电传导性 实验的详细说明和方法（ISO 284： 1982）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 25 3124-1953 Limit gauges Not-go-side of plug gauges diameter over 30 up to 100 mm《废品面滚轴口 超过30至100毫米》.pdf

CSN 25 3126-1953 Limit gauges Double-sided plug gauges diameter over 30 up to 100 mm《辊口径双面超过30至100毫米》.pdf

CSN 25 3127-1953 Limit gauges Handles for double-sided plug gauges《双面手柄滚轴口径》.pdf

CSN 25 3128-1953 Limit gauges Screws for handles of plug gauges《手柄螺丝口径》.pdf

CSN 25 3140-1953 Limit gauges One-sided calliper gauges diameter 60 up to 160 mm《扁口径 单面60至160毫米》.pdf

CSN 25 3142-1953 Limit gauges One-sided calliper gauges diameter 60 up to 160 mm《扁口径 单面60至160毫米》.pdf

CSN 25 3145-1953 Limit gauges End gauges with spherical surface《球形面内径规》.pdf

CSN 25 3170-1953 Limit gauges Double-sided snap gauges Range 3 up to 100 mm《双面马镫口径范围3至100毫米》.pdf

CSN 25 3172-1953 Limit gauges Double-sided snap gauges Range 2 up to 103 mm《双面马镫口径2至103毫米》.pdf