NBN-EN 24018-1992 3750 《顶端为六边形的螺钉 部分加工等级C》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 58726-2015 Production in optical engineering - Screwed connections without fitting part《光学加工 无连接配件的螺纹连接件》.pdf

DIN 58727-1-2015 Production in optical engineering - Surfacing pins for optics processing machines - Part 1 Without ball point cemented metal carbide《光学工程生产 光学处理仪用平面销 第1部分 无球点硬质合金》.pdf

DIN 58727-2-1986 Produktion in optical engineering surfacing pins with spherical cemented metal carbide point《光学工程生产 第2部分 镶嵌球形硬质合金尖的平面加工销》.pdf

DIN 58727-3-1986 Production in optical engineering surfacing pins with cylindrical cemented carbide point《光学工程生产 第3部分 镶嵌圆柱形硬质合金尖的平面加工销》.pdf

DIN 58729-2016 Production in optical engineering - Ball seats《光学加工 球座》.pdf

DIN 58735-2006 Production in optical engineering - Magazin-discs《光学加工 储存盘》.pdf

DIN 58736-1-1997 Production in optical engineering - Centering bells - Part 1 With fitting thread《光学加工 定心罩 第1部分 带连接螺纹》.pdf

DIN 58736-2-2001 Production in optical engineering - Centering bells - Part 2 With cylindrical fitting dimension 30 mm and 46 mm for inner connection《光学加工 定心罩 第2部分 内部连接尺寸30mm和46mm带.pdf

DIN 58736-3-2001 Production in optical engineering - Centering bells - Part 3 With cylindrical fitting dimension 12 mm and 25 mm for outer connection《光学加工 定心罩 第3部分 外连接用圆柱形接头 尺寸12mm.pdf