NC 01-06-1967 Conversion of toleranced dimensions from inches into milimetres and viceversa 《公差尺寸转换：从英寸转换成毫米或者相反》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ISA 75.08.03-2001 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150 300 600 900 1500 and 2500)《承插焊接端和螺旋端球型控制阀的端面间尺寸(ANSI类型150.pdf

ANSI ISA 75.08.04-2001 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500)《对焊端球型控制阀的端面尺寸》.pdf

ANSI ISA 75.08.05-2016 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150 300 600 900 1500 and 2500) (Formerly ISA 75.15).pdf

ANSI ISA 75.08.06-2002 Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900 1500 and 2500)《带凸缘的球型(类型900、1500和2500)控制阀体的面对面尺寸》.pdf

ANSI ISA 75.08.07-2001 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150 300 and 600)《可分离的凸缘球型控制阀的端面间尺寸(类型150、300和600)》.pdf

ANSI ISA 75.08.08-2015 Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150 300 and 600).pdf

ANSI ISA 75.08.09-2016 Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150 300 and 600).pdf

ANSI ISA 75.10.01-2013 General Requirements for Clamp or Pinch Valves《夹具或箍缩阀用一般要求》.pdf

ANSI ISA 75.10.02-2008 Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Class 125 and 150)《双重收缩法兰夹具或收缩阀用安装面对面尺寸(等级125和150)》.pdf