NC 09-04-102-1988 Unified Elements System of Moulds Dies Stampers and Machiníng Devices Machining Device Slotted Nut Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 带槽螺母 设计规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 6284-2006 化工产品中水分测定的通用方法 干燥减量法.pdf

GB T 6285-2003 气体中微量氧的测定 电化学法.pdf

GB T 6286-1986 分子筛堆积密度测定方法.pdf

GB T 6287-1986 分子筛静态水吸附测定方法.pdf

GB T 6288-1986 粒状分子筛粒度测定方法.pdf

GB T 6289-2013 夹扭钳和剪切钳 术语.pdf

GB T 6290-2013 夹扭钳和剪切钳 通用技术条件.pdf

GB T 6291-2013 夹扭钳和剪切钳 试验方法.pdf

GB T 6297-2002 陶瓷原料差热分析方法.pdf