NC 09-49-1968 Punches Diameter from 26 up to 50 mm《冲床 26-50毫米直径》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3933-1998(2004) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)《结构胶粘剂粘结铝表面处理的实施规程(磷酸阴极氧化处理)》.pdf

ASTM D3933-1998(2010) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)《结构胶粘剂粘结铝表面处理的标准指南(磷酸阴极氧化处理)》.pdf

ASTM D3933-1998(2017) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)《构胶粘剂粘结铝表面处理的实施规程(磷酸阴极氧化处理)》.pdf

ASTM D3934-1990(2007) Standard Test Method for Flash No Flash Test-Equilibrium Method by a Closed-Cup Apparatus《平衡闭杯法测定闪点 无闪点试验的标准试验方法》.pdf

ASTM D3934-2014 Standard Test Method for Flash No Flash TestEquilibrium Method by a Closed-Cup Apparatus《采用闭杯装置平衡法的闪光 无闪光试验的标准试验方法》.pdf

ASTM D3935-2002 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material《未填充的和增强的聚碳酸酯材料标准规范》.pdf

ASTM D3935-2009 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material《未填充的和增强的聚碳酸酯材料标准规范》.pdf

ASTM D3935-2015 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material《聚碳酸酯 (PC) 末装填和增强材料的标准分类系统和基础规格》.pdf

ASTM D3936-2005 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering《绒头纱线地板覆盖物的第二层背衬耐脱层性的标准试验方法》.pdf