NC 45-13-1984 Polygraphic Industry Original for Its Polygraphic Processing Presentation Requirements《印刷业 印刷过程的起点 展示要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6020-2000(2016) 7486 Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage《计算 (非矿物) 组合鞣剂和鞣度的标准实施规程》.pdf

ASTM D6021-2006 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection《通过复式顶端空间萃取和硫比率测定的残留燃.pdf

ASTM D6021-2012 red 3250 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection《通过复式顶端空间提取和.pdf

ASTM D6021-2012(2017) 4375 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection《用复式顶端空间萃取.pdf

ASTM D6022-2006 Standard Practice for Calculation of Permanent Shear Stability Index《永久剪切稳定性指数计算的标准实施规程》.pdf

ASTM D6022-2006(2012) 3125 Standard Practice for Calculation of Permanent Shear Stability Index《永久剪切稳定性指数计算的标准操作规程》.pdf

ASTM D6023-2002 Standard Test Method for Unit Weight Yield Cement Content and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)《可控制的低强度材料(CLSM)中空气含量、水泥含量、弯曲度和单位重.pdf

ASTM D6023-2007 374 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的密度(单位.pdf

ASTM D6023-2015 1764 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料 (CLSM) 的密度.pdf