NC 57-64-1985 Personal Service Hair-Dpessing Shop Classification《个人劳务 美发店》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 29004-1991 Cores for inductors and transformers for telecommunications Part 1 Measuring methods《远距离通信设备中采用的感应线圈和变压器用的铁芯 第1部分测量方法》.pdf

GOST 29005-1991 Cores for inductors and transformers for telecommunications Part 2 Guides for drafting specifications《远距离通信设备中采用的感应线圈和变压器用的铁芯 第2部分 技术条件编制的指导书》.pdf

GOST 29006-1991 Metallic powders Method for determination of hydrogen-reducible oxygen《金属粉末 氢还原的氧的测定法》.pdf

GOST 29007-1991 Rubber Method for defermination of adhesion elements in the chamber of pneumatic tyres《橡胶 充气轮胎的内胎元件结合强度测定法》.pdf

GOST 29008-1991 Machinery for forestry mobil and self-propelled Terms and definition《林业用活动的自行走式机械 术语与定义》.pdf

GOST 29010-1991 Lubricating systems Testing methods《润滑系统 试验方法》.pdf

GOST 29011-1991 Electromechanical switches for use in electronic equipment Part 2 Sectional specification for rotary switches《电子设备用电气机械开关 第2部分 旋转开关的成组技术条件》.pdf

GOST 29012-1991 Powder metallurgy Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering《金属粉末 挤压力去除后及烧结时的压块尺寸变化的测定方法》.pdf

GOST 29013-1991 Fabrics for blankets and corsets from chemical threads and yarn General specifications《化学长丝及纱线制成的毯子织物与紧身织物 一般技术条件》.pdf