NC 98-76-1987 Non-Electric Household Items Flatwares Quality Soecifications《非电动日用品 扁平餐具 质量规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D103-A-2009 TUBING POLYVINYL CHLORIDE - EXTRUDED TO BE USED WITH FORD WSS-M99P1111-A 《挤塑聚氯乙烯管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D113-C-2006 POLYURETHANE FOAM FLEXIBLE SLAB AND MOLDED TO BE USED WITH FORD WSS-M99P1111-A (USE WSB-M2D402-A3)《柔性板式和模制聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 使用WSB-M2D402-A.pdf

FORD ESB-M4D128-A-2008 POLYETHYLENE FOAM - PRESSURE SENSITIVE ADHESIVE BACKED TO BE USED WITH FORD WSS-M99P1111-A 《背部有压敏胶的聚乙烯泡沫(和FORD WSS-M99P1111-A一起使用)(FORD WSK-M4D649-A FORD W.pdf

FORD ESB-M4D133-A-2009 NYLON GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《玻璃纤维增强的尼龙 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSK-M4D664-A2 FORD WSK-M4D664-A2 FORD WSK.pdf

FORD ESB-M4D137-B-2009 POLYVINYL CHLORIDE PLASTISOL CAST ON STEEL TO BE USED WITH FORD WSS-M99P1111-A 《浇铸在钢制品上的聚氯乙烯溶胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D145-A-1995 POLYETHYLENE (PE) LINEAR BLOW MOLDING COMPOUND《聚乙烯（PE）线状吹塑塑料》.pdf

FORD ESB-M4D147-A-2008 POLYETHYLENE (PE) LINEAR - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《挤塑级线型聚乙烯（PE） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D148-A-2005 POLYVINYL CHLORIDE (PVC) COPOLYMER HOT DIP PLASTISOL TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯（PVC）共聚物热浸塑料溶胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D151-A-2008 POLYETHYLENE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯成型料 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M4D955-A FORD WSS-M4D955-A FORD WSS-M4D.pdf