NEN 10192-1994 Low pressure sodium vapour lamps (IEC 192 1973+A1 1979+A2 1988+A3 1993)《IEC 192-1973+A11979+A2-1988+A3-1993 低压钠蒸气灯 性能规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M2D221-D-2006 POLYURETHANE FOAM HIGH LOAD BEARING - 42 kg m3 TO BE USED WITH FORD WSS-M99P1111-A 《42 kg m3的高负荷轴承用聚氨酯泡沫[使用 FORD WSB-M2D402-A3 FORD WSB-M2D402-A3 FORD WSB-.pdf

FORD ESB-M2D226-A1-2009 EPDM RUBBER EXTERIOR - COLOR PIGMENTED TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用着色三元乙丙橡胶（EPDM）橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D246-A1-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER EXTERIOR PAINTABLE - LOW MODULUS TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用低模量可印刷热塑性聚烯径弹性体 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD ESB-M2D246-A2-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER PAINTABLE INTERMEDIATE MODULUS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M2D246-A1).pdf

FORD ESB-M2D246-A3-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER PAINTABLE HIGH MODULUS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M2D246-A1).pdf

FORD ESB-M2D260-B-2009 POLYURETHANE FOAM SLAB - POLYESTER TYPE HEAT FORMABLE TO BE USED WITH FORD WSS-M99P1111-A 《可热成型的聚酯平板式聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D263-A3-2009 POLYURETHANE MICROCELLULAR ELASTOMER - LIQUID REACTION MOLDED (LRM) - INTERMEDIATE MODULUS - IMPROVED TEMPERATURE PERFORMANCE - PAINTABLE TO BE USED WITH F.pdf

FORD ESB-M2D263-A4-2009 POLYURETHANE MICROCELLULAR ELASTOMER - RIM - EXTERIOR - PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部边缘用可印刷聚氨酯微孔弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D280-A-2009 SILICONE ELASTOMER INHERENTLY LUBRICATED TO BE USED WITH FORD WSS-M99P1111-A 《固有润滑硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf