NEN 6485-1983 Water - Photometric determination of chromium content《水 铬含量的光度分析法测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2767-2011 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods《X线计算机断层(CT)试验方法用无损评估(.pdf

ASTM E2767-2013 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation &40 DICONDE&41 for X-ray Computed Tomography &40 CT&41 Test Methods《X射线极端及断层扫描4.pdf

ASTM E2767-2013(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods.pdf

ASTM E2768-2011 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)《建筑材料延时表面燃烧特性的标准试验方法(30 min坑道试验)》.pdf

ASTM E2768-2011(2018) Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test).pdf

ASTM E2769-2011 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading《用三点弯曲的装载在控制速度下进行热机械分析弹性模量的标准试验方法》.pdf

ASTM E2769-2013 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading《采用三点弯曲和控制装载率进行热机械分析弹性模量的标准试验方法》.pdf

ASTM E2769-2015 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading《采用三点弯曲和控制装载率进行热机械分析弹性模量的标准试验方法》.pdf

ASTM E2769-2016 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading《采用三点弯曲和控制装载率进行热机械分析弹性模量的标准试验方法》.pdf