NEN 6651-1992 Water - Photometric determination of the content of dissolved chloride by continuous flow analysis《水 通过连续流动分析光度分析法测定溶解氯的含量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5202 D5202M-2016 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils《测定化学灌浆土壤的三轴压缩蠕变强度的标准试验方法》.pdf

ASTM D5202-2002 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils《测定化学灌浆土壤的三轴压缩蠕变强度的标准试验方法》.pdf

ASTM D5202-2008 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils《测定化学灌浆土壤的三轴压缩蠕变强度的标准试验方法》.pdf

ASTM D5204-2006 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials《聚酰胺-酰亚胺模塑和挤压材料的标准分类体系》.pdf

ASTM D5204-2011 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials《聚酰胺 - 酰亚胺(PAI)模塑料和挤压材料的标准分类体系》.pdf

ASTM D5204-2013 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials《聚酰胺-酰亚胺(PAI)的标准分类系统 模制和挤制材料》.pdf

ASTM D5204-2017 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials《聚酰胺酰亚胺(PAI)模塑和挤出材料标准分类体系和规范基础》.pdf

ASTM D5205-1996(2003) Standard Classification System for Polyetherimide (PEI) Materials《聚醚酰亚胺(PEI)材料的标准分类体系》.pdf

ASTM D5205-2010 Standard Classification System for Polyetherimide (PEI) Materials《聚醚酰亚胺(PEI)材料的标准分类体系》.pdf