NF C20-151-1988 Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 2 cabinets and pitches of rack structures 《482 6 mm (19 in) 系列机械结构尺寸 第2部分 机箱与箱架结构间距》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 09-104-1968 Threaded pins for molding《成型螺纹销》.pdf

NC 09-105-1968 Mouthpice for molding《成型弹簧螺纹销》.pdf

NC 09-106-1967 Circular frames faceplates and support for molding《圆形框架 面板和成型支撑》.pdf

NC 09-107-1968 Stops for plastic molding《塑料成型栓》.pdf

NC 09-108-1968 Columns for mouldings《成型圆柱》.pdf

NC 09-109-1968 Knock-out pin for molding《成型敲出销》.pdf

NC 09-11-1968 Cast iron and cast steel die set《钢结构或铁结构冲压框架，带四个支架的矩形工作台》.pdf

NC 09-110-1967 Bearing ring for molding《成型轴承环》.pdf

NC 09-111-1968 Bushings for moldings《成型轴衬》.pdf