NF C20-735-1987 Basic environmental testing procedures Test methods Test Fda randim vibration wide band Reproducibility 《基本环境试验程序 试验方法 Fda 试验 宽带的随机振动 可再现性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7412-2018 red 5625 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Us.pdf

ASTM D7414-2009 5625 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform I.pdf

ASTM D7414-2018 red 9375 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transfo.pdf

ASTM D7415-2009 7500 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier T.pdf

ASTM D7415-2018 red 9375 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fouri.pdf

ASTM D7416-2008 317 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity Time-Resolved Dielectric Permittivity with Switchi.pdf

ASTM D7416-2009 9375 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity Time-Resolved Dielectric Permittivity with Switch.pdf

ASTM D7416-2009(2015) 2346 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity Time-Resolved Dielectric Permittivity with .pdf

ASTM D7417-2010 9375 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy Infrared Spectroscopy Vis.pdf