ewordThis British Standard is the UK implementation of ISO 30021:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/
耐高温性能聚合物材料Tag内容描述：
1、ewordThis British Standard is the UK implementation of ISO 30021:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/26, Burning behaviour of plastics and rubbers.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI Standa。
2、r immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers measurement of the rheologicalproperties of polymeric materials at various temperatures andshear rates common to processing equipment. It covers mea-surement of melt vi。
3、ton utilisant des polymres renforcs de fibres (PRF) INTERNATIONAL STANDARD ISO 14484 First edition 2013-04-01 Reference number ISO 14484:2013(E) ISO 14484:2013(E)ii ISO 2013 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, w。
4、y following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method determines the flexural stiffness andstrength properties of polymer matrix composites.1.1.1 Procedure AA three-point loading system utilizingcenter loading on a simply supported beam.1.1。
5、 following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1. Scope1.1 This test method determines the in-plane tensile prop-erties of polymer matrix composite materials reinforced byhigh-mo。
6、 following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1. Scope1.1 This test method determines the in-plane tensile prop-erties of polymer matrix composite materials reinforced byhigh-mo。
7、ately following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method determines the flexural stiffness andstrength properties of polymer matrix composites.1.1.1 Procedure AA three-point loading system utilizingcenter loading on a simply supported beam.1.1.。
8、1984 04 03 Released CA01-DR524140 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 GREASE, LITHIUM COMPLEX - POLYMER ADDITIVE - WSB-M1C208-A1 HIGH TEMPERATURE - NLGI #1 GREASE, LITHIUM COMPLEX - POLYMER ADDITIVE WSB-M1C208-A2 HIGH TEMPERATURE, NLGI #2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are high temperature lubricants containing lithium complex soap and mineral oil, modified with a polymer agent 。
