NF E66-200-1-1993 Parallel shanks for milling cutters Part 1 dimensional characteristics of plain parallel shanks 《铣刀的直刀柄 第1部分 普通直刀柄的尺寸特性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 18065-1991 Horisontal gear-hobbing machines for spur gears Basic parameters and dimensions Standards of accuracy《圆柱齿轮用卧式铣齿机 基本参数与尺寸精度规范》.pdf

GOST 18066-1972 Laminated glued wood Method of determining bending ability《层压胶合板 弯曲能力的测定方法》.pdf

GOST 18068-1972 Laminated glued wood Method of determining linear dimension changes in accordance with relative humidity《层压胶合板 随着相对湿度变化而发生的线性尺寸变化的测定方法》.pdf

GOST 18069-1972 Clamping bushings with a slider for tools with a cylindrical tail Design and dimensions《圆柱柄工具用带衬铁夹紧套 结构及尺寸》.pdf

GOST 18070-1972 Clamping bushings with a shoulder for tools with a cylindrical tail Design and dimensions《具有筒形尾端的工具用带肩压紧套 设计和尺寸规格》.pdf

GOST 18071-1972 Changeable arbors for the straigh fixing of cutters for turret automatics Design and dimensions《六角自动车床直线固定刀具用可换刀轴 设计和尺寸规格》.pdf

GOST 18072-1972 Changeable arbors for tangential cutters for turret automatics Design and dimensions《六角自动车床切向刀具用可换刀轴 设计和尺寸规格》.pdf

GOST 18073-1972 Arbors for tangential cutters and clamping bushings for turret automatics Design and dimensions《六角自动车床切向刀具和压紧套用刀轴 设计和尺寸规格》.pdf

GOST 18074-1972 Arbors for the straight fixing of cutters and clamping bushing for turret lathes Design and dimensions《六角车床直接固定车刀和夹紧套用刀夹 结构及尺寸》.pdf