NF L29-812-1966 Lubricating nipples for bearings 《轴承用润滑油嘴》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 17707-2006 Footwear－Test methods for outsoles－Flex resistance《鞋靴 外底的试验方法 抗弯性》.pdf

KS M ISO 17709-2005 Footwear－Sampling location preparation and duration of conditioning of samples and test pieces《鞋类 样品和试件的调节时间、取样位置和制备》.pdf

KS M ISO 178-2012 Plastics－Determination of flexural properties《塑料 弯曲性能测定》.pdf

KS M ISO 17812-2009 paper board and pulps－Determination of total magnesium total calcium total manganese total iron and total copper《纸、纸板和纸浆 镁总含量、钙总含量、锰总含量、铁总含量和铜总含量的测定》.pdf

KS M ISO 179-1-2012 Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test《塑料 摆式冲击性能的测定 第1部分 无损冲击试验》.pdf

KS M ISO 179-2-2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test《塑料 摆锤式冲击特性的测定 第2部分 仪器冲击试验》.pdf

KS M ISO 1798-2012 Flexible cellular polymeric materials－Determination of tensile strength and elongation at break《柔性泡沫聚合材料 拉力强度和断裂时延伸率的测定》.pdf

KS M ISO 180-2012 Plastics－Determination of Izod impact strength《塑料 伊兆特(Izod)冲击强度的测定》.pdf

KS M ISO 1802-2009 Natural rubber latex concentrate－Determination of boric acid content《天然橡胶胶乳浓缩物 硼酸含量的测定》.pdf