NS 171-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing Tongue and groove.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 72 9201-1975 Mills Terminology 《铣刀 术语》.pdf

CSN 72 9301-1976 Screen classifiers Terminology《筛分机 术语》.pdf

CSN 73 0005-1989 Modular coordination of dimensions in construction Basic specifications《建筑结构中尺寸模块协调性 基本要求》.pdf

CSN 73 0032-1977 Calculation of building structures loaded by dynamic effect of machines《估算建筑结构的机械动力效应载荷》.pdf

CSN 73 0039-1989 Design constructed facilities in mining subsidence areas Basic requirements《开采沉陷区域的设计构成设施 基本要求》.pdf

CSN 73 0080-1985 Protection of building constructions against corrosion Terminology《建筑结构抗腐蚀保护 术语》.pdf

CSN 73 0081-1985 Protection against corrosion in building General regulations《建筑物的腐蚀防护 一般规则》.pdf

CSN 73 0210-1-1992 Geometrical accuracy in building industry Conditions of operation Accuracy of erection《施工条件几何精度 第1部分：拟合的准确性》.pdf

CSN 73 0212-4-1994 Geometrical accuracy in building industry Accuracy checking Part 4 Line structures《建筑业的几何精确度 准确性检查 第4部分：线性结构》.pdf