NS 4302-1975 Health service - Operating theatre arm strap.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 2437-2003 Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys German and English version EN 2437 2001《航空航天系列 铝及铝合金铬酸盐转化涂层(黄色)》.pdf

DIN EN 2438-2009 Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa R 1100 MPa - Bars - D 40 mm German and English version EN 2438 2008《航空航天系列 钢FE-PL21021(35NiCr6) 900 MPa≤Rm≤1.pdf

DIN EN 2439-2009 Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa R 1100 MPa - Forgings - D 40 mm German and English version EN 2439 2009《航空航天系列 钢FE-PL2102(35NiCr6) 900 MPa≤R.pdf

DIN EN 2446-2009 Aerospace series - Steel FE-PL1503 (35CrMo4) - 1100 MPa R 1300 MPa - Bars - D 25 mm German and English version EN 2446 2008《航空航天系列 钢FE-PL1503(35CrMo4) 1100 MPa≤ Rm.pdf

DIN EN 2448-2009 Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa R 1100 MPa - Bars - D 40 mm German and English version EN 2448 2008《航空航天系列 钢FE-PL1503(35CrMo4) 900 MPa≤Rm≤11.pdf

DIN EN 246-2003 Sanitary tapware - General specifications for flow rate regulators German version EN 246 2003《卫生设备旋塞 流速调节器的一般规范》.pdf

DIN EN 2460-2009 Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa R 800 MPa - Bars - D 70 mm German and English version EN 2460 2009《航空航天系列 钢 FE-PM1901(X12CrNi13) 600 MPa R.pdf

DIN EN 2461-2009 Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa R 800 MPa - Forgings - D 70 mm German and English version EN 2461 2009《航空航天系列 钢FE-PM1901(X12CrNi13) 900 MP.pdf

DIN EN 2465-2008 Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa R 680 MPa - Bar for machining - 4 mm D 100 mm German and English version EN 2465 2007《航空航天系列 F.pdf