NS 7349-1983 Valves - Stainless steel ball valves - Flanged full bore - DN 15 to DN 600 - Nominal pressure PN 25 and PN 40 - Soft seal.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 55402-2-2016 Packaging - Marking for shipping of packages - Part 2 Directive for export packaging《包装 包装件装运标记 第2部分 出口商品包装导则》.pdf

DIN 55403-2014 Packaging test - Test method for packaging films - Determination of the tendency to curl《包装测试 包装薄膜的试验方法 卷曲倾向的测定》.pdf

DIN 55404-2014 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials《包装试验 测定软包装材料样式重复的试验方法》.pdf

DIN 55405-2014 Packaging - Terminology - Terms and definitions《包装 术语 术语和定义》.pdf

DIN 55406-2015 Packaging - Special requirements for the delivery purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and ).pdf

DIN 55407-2-1995 Packaging - General technical terms of delivery and supply - Part 2 Catalogue of errors《包装 一般交货与供货技术条件 第2部分 误差一览表》.pdf

DIN 55409-1-2012 Packaging - Test method for determining opening forces for peelable packagings - Part 1 Flexible packagings《包装 可剥离包装用开启力测定试验方法 第1部分 软包装》.pdf

DIN 55409-2-2013 Packaging - Test method for determining opening forces for peelable packagings - Part 2 Dimensionally stable packagings《包装 测定可剥离包装用开启力的试验方法 第2部分 尺寸稳定包装》.pdf

DIN 5542-1975 Ends of Laminated Springs for Rail Vehicles《有轨车辆板簧末端》.pdf