ONORM DIN 7873-4-1992 Windsurfboards - Fins - Dimensions safety requirements and testing - Marking of conformity《冲浪帆板 鳍尺寸，安全要求和试验 合格标识》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6615-2015 8719 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel《喷射B类宽馏分航空涡轮机燃料的标准规格》.pdf

ASTM D6615-2015a red 1482 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel《喷射B类宽馏分航空涡轮机燃料的标准规格》.pdf

ASTM D6616-2001a(2006) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100&176 C《在摄氏100度时用锥形承载模拟器粘度计测量高剪切速率时粘度的标准试验方法》.pdf

ASTM D6616-2007 346 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x00B0 C《在100℃时用锥形承载模拟器粘度计测量高剪切速率时粘度的标准试验方法》.pdf

ASTM D6616-2007(2012) 1875 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100° C《在100摄氏度时用锥形轴承模拟器粘度计测量高剪切率时粘度的标准试验方法》.pdf

ASTM D6616-2017 red 8584 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x2009 &xb0 C《在100℃高剪切速率下用锥形轴承模拟器粘度计测量粘度的标准试验.pdf

ASTM D6617-2005 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material《用标准物质的单项试验结果检测实验室偏差的标准实施规程》.pdf

ASTM D6617-2008 752 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material《用标准物质的单项试验结果检测实验室偏差的标准实施规程》.pdf

ASTM D6617-2013 6875 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material《采用来自标准材料的单项试验结果进行实验室偏差检测的标准实施规程》.pdf