ONORM EN 298-1994 Automatic gas bumer control systems for gas burners and gas burning appliances with or without fans《带或不带风机的燃气炉及燃气装置用自动燃气炉控制系统》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 20328-1974 Disk type milling cutters for cutting termoplasts Construction and dimensions《加工直径315mm及400mm热塑料用圆盘铣刀 结构及尺寸》.pdf

GOST 20329-1974 Cutting off saws for cutting thermosetting plastics and thermoplasts Specifications《热固及热塑塑料截断用切断铣刀 结构及尺寸》.pdf

GOST 20330-1991 Coal Determination of the crucible swelling number《煤 游离系数测定法》.pdf

GOST 20332-1984 Thyristors Terms definitions and letter symbols《半导体开关元件 术语，定义和参数的字母符号》.pdf

GOST 20334-1981 Motor vehicle maintenance and repair system Characteristics of maintainability and repairability《汽车技术服务和修理体系 使用工艺性和修理合理性的指标》.pdf

GOST 20337-1974 X-ray devices Terms and definitions《X射线仪 术语和定义》.pdf

GOST 20340-1974 Metal casting patterns Fixing patterns by pins on metal pattern plates Design and dimensions《铸造用金属模 模用无头钉在金属模板上的定位 结构及尺寸》.pdf

GOST 20341-1974 Metal casting patterns Securing patterns by screws on metal pattern plates Design and dimensions《铸造用金属模 模用螺钉在金属模板上的紧固 结构及尺寸》.pdf

GOST 20342-1974 Metal casting patterns Bolting patterns on metal pattern plates Design and dimensions《铸造用金属模 模用螺栓在金属模板上的紧固 结构及尺寸》.pdf