ONORM M 9603-1977 Cremes and lifting appliances ropes pulleys and drums《起重机和起重机械 绳索，滑轮和鼓轮》.pdf

相关资源

JB T 10559-2006 起重机械无损检测 钢焊缝超声检测.pdf

JB T 10746-2007 YEZ系列建筑起重机械用锥形转子制动三相异步电动机技术条件.pdf

JB T 8437-1996 起重机械无线遥控装置.pdf

GB T 31052.8-2016 起重机械 检查与维护规程 第8部分：铁路起重机.pdf

GB T 31052.9-2016 起重机械 检查与维护规程 第9部分：升降机.pdf

JT T 79-1994 港口集装箱大型起重机械检测技术规范.pdf

JT T 79-2008 港口集装箱大型起重机械检测技术规范.pdf

GB T 12602-2009 起重机械超载保护装置.pdf

LD 48-1993 起重机械吊具与索具安全规程.pdf

LD 64-1994 起重机械防碰装置安全技术规范.pdf

猜你喜欢

CNS 4997-1979 Short Machine Taps and Hand Taps《短柄机力螺丝攻与手扳螺丝攻》.pdf

CNS 4998-1979 Long Shank Machine Taps with Nominal Diameters from 3 to 24 mm《长柄机力螺丝攻（标称直径自3MM至24MM）》.pdf

CNS 4999-1979 Hand Taps for Pipe Threads for Parallel and Taper Threads-General Dimensions and Marking《用于平行及推拔管螺纹之手扳螺丝攻（一般尺度及标示）》.pdf

CNS 5000-1984 Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to Coarse and Fine Pitches-Manufacturing Tolerances on the Threaded Portion《螺丝攻磨制螺纹公差（用于4H至8H及.pdf

CNS 5001-2000 Assembly tools for screws and nuts-Driving squares for hand socket tools and power socket wrenches《螺钉及螺帽之装配工具-方驱动头》.pdf

CNS 5002-1998 Assembly tools for screws and nuts - Machine-operated square drive sochet wrenches test torques series E《螺钉及螺帽之装配工具–机动套筒扳手（E级扭矩）》.pdf

CNS 5003-2000 Assembly tools for screws and nuts-Hexagon drive ends for hand -and machine-operated screwdriver bits《螺钉及螺帽之装配工具–起子头六角驱动头》.pdf

CNS 5004-1992 Reflex Reflectors for Pedal Bicycles《自行车（脚踏车）用反光板》.pdf

CNS 5005-1979 Rubber Vulcanization Accelerator CBS (N-cyclo Hexyl-2-benzothiazyl Sulfenamide)《硫化促进剂CBS（N–环己基–2–苯噻唑亚磺醯胺）》.pdf