ONORM S 3031-1997 Commercial catenng equipment -Ranges and auxiliaries -Definitions dimensions matenals《商业餐饮设备 炉灶及附件定义；尺寸；材料》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

MSZ 3871-1979 《MSZ 3871-79莫尔斯锥形把指型铣刀》.pdf

MSZ 3872-1979 《MSZ 3872-79莫尔斯锥形把的，长型指型铣刀》.pdf

MSZ 3873-1960 《圆柱形长把的齿轮的长孔的铣床刀具 直径=3－25》.pdf

MSZ 3873-1983 《MSZ 3873－83圆柱形》.pdf

MSZ 3874-1979 《MSZ 3874-79莫尔斯锥把的长孔铣刀》.pdf

MSZ 3875-1960 《批量生产的带圆锥侧面铣床刀具 直径=16－50》.pdf

MSZ 3875-1976 《MSZ 3875-76 7 24锥形把的长孔铣刀》.pdf

MSZ 3876-1980 `《MSZ 3876-80拱形钩型铣刀》.pdf

MSZ 3877-1982 《MSZ 3877-82 T钩型铣刀》.pdf