REG NASA-LLIS-0430-1996 Lessons Learned Permeability Swelling and Solvent-Stress-Cracking Polymeric and Elastomeric Materials (1977).pdf

上传人:progressking105 文档编号:1018077 上传时间:2019-03-21 格式:PDF 页数:2 大小:12.86KB
下载 相关 举报
REG NASA-LLIS-0430-1996 Lessons Learned Permeability Swelling and Solvent-Stress-Cracking Polymeric and Elastomeric Materials (1977).pdf_第1页
第1页 / 共2页
REG NASA-LLIS-0430-1996 Lessons Learned Permeability Swelling and Solvent-Stress-Cracking Polymeric and Elastomeric Materials (1977).pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 0430Lesson Info:a71 Lesson Number: 0430a71 Lesson Date: 1996-07-15a71 Submitting Organization: JPLa71 Submitted by: J.A. RobertsSubject: Permeability, Swelling and Solvent-Stress-Cracking Polymeric and Elastomeric Materials (1977) Abstract: During fabrication of the TIROS-N Mi

2、crowave Sounding Unit, connector cleaning fluids penetrated to the interior of the chassis. This caused severe swelling of the conformal coating material and the subsequent fracture of electronic components, dissolution of polyurethane insulation on the magnet hookup wire, and removal of component i

3、dentification markings. To preclude detrimental results, care should be exercised in the selection of fluids to be used with or in the presence of polymeric and elastomeric materials.Description of Driving Event: (Relevant Historical Lesson(s) Learned)During the fabrication of the Television Infrare

4、d Observation Satellite (TIROS-N) Microwave Sounding Unit, fluids used to clean chassis mounted connector penetrated around and through the connectors to the interior of the chassis causing severe swelling of the conformal coating material and the subsequent fracture of electronic components, dissol

5、ution of polyurethane insulation on magnet hookup wire and removal of component identification markings.Additional Keyword(s): Connector Cleaning, PolymersReference(s): PFR #2649Lesson(s) Learned: Most polymeric and elastomeric materials are permeable and are subject to swelling and solvent-Provided

6、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-stress-cracking when exposed to some fluids.Recommendation(s): To preclude detrimental results, care should be exercised in the selection of fluids to be used with or in the presence of polymeric and elastomeri

7、c materials.Evidence of Recurrence Control Effectiveness: N/ADocuments Related to Lesson: N/AMission Directorate(s): N/AAdditional Key Phrase(s): a71 Hardwarea71 Parts Materials & ProcessesAdditional Info: Approval Info: a71 Approval Date: 1996-04-11a71 Approval Name: Carol Dumaina71 Approval Organization: JPLa71 Approval Phone Number: 818-354-8242Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSS-M4D959-A-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% CALCIUM CARBONATE FILLED HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND 25% MIN POST CONSUMER CONTENT  TO BE USED WITH F.pdf FORD WSS-M4D959-A-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% CALCIUM CARBONATE FILLED HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND 25% MIN POST CONSUMER CONTENT TO BE USED WITH F.pdf
  • FORD WSS-M4D959-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 30% CALCIUM CARBONATE FILLED HEAT STABILIZED 25% MIN POST CONSUMER CONTENT  TO BE USED WITH FORD WSS-M99P1111-A  《30%碳酸钙填充热稳定.pdf FORD WSS-M4D959-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 30% CALCIUM CARBONATE FILLED HEAT STABILIZED 25% MIN POST CONSUMER CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《30%碳酸钙填充热稳定.pdf
  • FORD WSS-M4D960-A-2006 ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《汽车内部用丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚酰胺混合物成型料  与标准FORD WSS-M99P1111-A一起使.pdf FORD WSS-M4D960-A-2006 ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚酰胺混合物成型料 与标准FORD WSS-M99P1111-A一起使.pdf
  • FORD WSS-M4D960-A2-2012 ABS + POLYAMIDE 6 BLEND (ABS + PA6) MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSS-M4D960-A2-2012 ABS + POLYAMIDE 6 BLEND (ABS + PA6) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSS-M4D960-B1-2018 ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND IMPACT MODIFIED INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSS-M4D960-B1-2018 ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND IMPACT MODIFIED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSS-M4D961-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR -  TO .pdf FORD WSS-M4D961-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR - TO .pdf
  • FORD WSS-M4D961-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR   TO B.pdf FORD WSS-M4D961-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR TO B.pdf
  • FORD WSS-M4D961-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS EXTERIOR  .pdf FORD WSS-M4D961-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS EXTERIOR .pdf
  • FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE MOLD-IN-COLOR AND PARTIALLY PAINTED EXTERIOR  TO .pdf FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE MOLD-IN-COLOR AND PARTIALLY PAINTED EXTERIOR TO .pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1