1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS3063B AEROSPACE STANDARD AS3063 REV. B Issued 1970-03 Revised 1996-08 Reaffirme
5、d 2012-11 Superseding AS3063A Bolts, Screws, and Studs, Geometric Control Requirements RATIONALE AS3063B has been reaffirmed to comply with the SAE five-year review policy.SAE AS3063B Page 2 of 9 SAE AS3063B Page 3 of 9 SAE AS3063B Page 4 of 9 SAE AS3063B Page 5 of 9 SAE AS3063B Page 6 of 9 SAE AS3063B Page 7 of 9 SAE AS3063B Page 8 of 9 SAE AS3063B Page 9 of 9
