SANS 420-2007 Canners- sucrose《罐头厂用蔗糖》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NS 1721-1978 Valves - Screw-down stop and check valves of leaded brass - Female threaded ends R 3 8 to R 2 - Threaded bonnet rising stem - Non-metallic seal - Nominal pressure PN16.pdf

NS 1722-1978 Valves - Gate valves of leaded brass - Female threaded ends R 3 8 to R 3 - Threaded bonnet non-rising stem - Nominal pressure PN16 - Max temperature 90 degrees Celsius.pdf

NS 1723-1978 Valves - Screw-down stop valves of leaded gunmetal - Female threaded ends R3 8 to R2 - Threaded bonnet Rising stem - Metallic seal - Nominal pressure PN16 - Max temper.pdf

NS 1724-1978 Valves - Screw-down stop valves of leaded gunmetal with flanges DN 10 and DN 80 - Threaded bonnet rising stem - Metallic seal - Nominal pressure PN16 - Max temperature.pdf

NS 1725-1978 Valves - Screw-down stop valves of leaded gunmetal with flanges Angle pattern - DN 10 to DN 80 - Threaded bonnet rising stem - Metallic seal - Nominal pressure PN16 - .pdf

NS 1726-1978 Valves - Gate valves of leaded gunmetal with flanges - DN 15 to DN 100 - Threaded bonnet non-rising stem - Nominal pressure PN16 - Max temperature 150 degrees Celsius.pdf

NS 1727-1978 Valves - Gate valves of leaded gunmetal - Female threaded ends R 3 8 to R 4 - Threaded bonnet non-rising stem - Nominal pressure PN16 - Max temperature 150 degrees Cel.pdf

NS 1728-1978 Valves - Disk check valves of leaded brass - Female threaded ends R 3 8 to R 2 - Threaded bonnet spring loaded disk - Non-metallic seal - Nominal pressure PN16 - Max t.pdf

NS 1729-1978 Valves - Disk check valves of leaded gunmetal - Female threaded ends R 3 8 to R 3 - Threaded bonnet spring leaded disk - Metallic seal - Nominal pressure PN16 - Max te.pdf