SANS 4347-2006 Leaf-chains clevises and sheaves - Dimensions measuring forces and tensile strengths《板式链条，U形夹和滑轮 尺寸，测量力和抗张强度》.pdf

相关资源

JIS P8227-2008 纸浆.湿法或干法零距抗张强度的测定.pdf

GB T 12914-1991 纸和纸板抗张强度的测定法(恒速拉伸法).PDF

FZ T 90078.3-1995 棉织机用丁腈缓冲圈试验方法抗张强度.pdf

QB T 2303.13-2008 电池用浆层纸 第13部分 抗张强度的测定.pdf

QB T 1269-1991 毛皮成品 抗张强度的测定.pdf

FZ T 90079.3-1995 棉织机用丁腈投梭结试验方法抗张强度.pdf

QB T 2710-2005 皮革 物理和机械试验抗张强度和伸长率的测定.pdf

SJ T 10171.4-1991 隔膜抗张强度的测定.pdf

QB T 1269-2012 毛皮 物理和机械试验 抗张强度和伸长率的测定.pdf

SH T 0402-1992 石蜡抗张强度测定法.pdf

猜你喜欢

ASME STP-PT-065-2013 BRANCH LEG STUDY FOR BIOPROCESSING EQUIPMENT《生物工艺设备的分支支柱研究》.pdf

ASME STP-PT-066-2014 DESIGN GUIDELINES FOR CORROSION EROSION AND STEAM OXIDATION OF BOILER TUBES IN PULVERIZED COAL-FIRED BOILERS《粉状煤燃烧锅炉中锅炉管腐蚀 侵蚀和蒸汽氧化应对设计指南》.pdf

ASME STP-PT-070-2014 DESIGN GUIDELINES FOR THE EFFECTS OF CREEP FATIGUE & CREEP-FATIGUE INTERACTION WITH DESIGN-BY-ANALYSIS AND NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA《根据经分析设.pdf

ASME STP-PT-070-2014 DESIGN GUIDELINES FOR THE EFFECTS OF CREEP FATIGUE & CREEP-FATIGUE INTERACTION WITH DESIGN-BY-ANALYSIS AND NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA《根据经分析设_1.pdf

ASME STP-PT-071-2014 STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS《厚壁圆筒容器内部裂纹的应力强度因子解决方案》.pdf

ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES《金属管的应力强度因子和K因子校正》.pdf

ASME STP-PT-074-2015 Local Stresses in Nozzles in Shells and Formed Heads from External Loads《外载荷作用下壳体和成形头中的局部应力》.pdf

ASME STP-PT-075-2015 Effect of Thickness on the Transformation Behavior of Grade 91 Steel.pdf

ASME STP-PT-076-2015 HANDLING OF DIFFERENCES IN YS UTS AND CREEP RUPTURE STRENGTH BETWEEN ASME AND OTHER STANDARDS (EN AS ETC ).pdf