1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 0-626-18910-1 SANS 62209-1:2006Edition 1 IEC 62209-1:2005Edition 1SOUTH AFRICAN NATIONAL STANDARD Human exposure to radio frequency fields from hand
4、-held and body-mounted wireless communication devices Human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) This national standard is the identical
5、 implementation of IEC 62209-1:2005 and is adopted with the permission of the International Electrotechnical Commission. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Sta
6、ndards South Africa SANS 62209-1:2006 Edition 1 IEC 62209-1:2005 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA TC 73, Electromagnetic compatibility, in accordance with procedures of Standards South Africa, in
7、compliance with annex 3 of the WTO/TBT agreement. This part of SANS 62209 was published in December 2006. . NORME INTERNATIONALECEIIECINTERNATIONAL STANDARD 62209-1Premire ditionFirst edition2005-02Exposition humaine aux champs radiofrquence produits par les dispositifs de communications sans fils t
8、enus la main ou ports prs du corps Modles de corps humain, instrumentation et procdures Partie 1: Dtermination du dbit dabsorption spcifique (DAS) produit par les appareils tenus la main et utiliss prs de loreille (plage de frquence de 300 MHz 3 GHz) Human exposure to radio frequency fields from han
9、d-held and body-mounted wireless communication devices Human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) Pour prix, voir catalogue en vigueur F
10、or price, see current catalogue IEC 2005 Droits de reproduction rservs Copyright - all rights reserved Aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans lacc
11、ord crit de lditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-12
12、11 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch CODE PRIX PRICE CODE XE Commission Electrotechnique InternationaleInternational Electrotechnical Commission SANS 62209-1:2006This s tandard may only be used and printed by approved sub
13、scription and freemailing clients of the SABS .62209-1 IEC:2005 3 CONTENTS FOREWORD.9 INTRODUCTION.13 1 Scope 15 2 Normative references .15 3 Terms and definitions .15 4 Symbols and abbreviated terms 31 4.1 Physical quantities.31 4.2 Constants33 4.3 Abbreviations 33 5 Measurement system specificatio
14、ns 33 5.1 General requirements 33 5.2 Phantom specifications (shell and liquid)35 5.3 Specifications of the SAR measurement equipment 45 5.4 Scanning system specifications45 5.5 Device holder specifications.45 5.6 Measurement of liquid dielectric properties.47 6 Protocol for SAR assessment47 6.1 Mea
15、surement preparation 47 6.2 Tests to be performed59 6.3 Measurement procedure 63 6.4 Post-processing of SAR measurement data65 7 Uncertainty estimation 67 7.1 General considerations 67 7.2 Components contributing to uncertainty69 7.3 Uncertainty estimation .93 8 Measurement report .97 8.1 General .9
16、7 8.2 Items to be recorded in the test report97 Annex A (normative) Phantom specifications 101 Annex B (normative) Calibration (linearity, isotropy, sensitivity) of the measurement instrumentation and uncertainty estimation113 Annex C (normative) Post-processing techniques and uncertainty estimation
17、 143 Annex D (normative) SAR measurement system validation .153 Annex E (informative) Interlaboratory comparisons .167 Annex F (informative) Definition of a phantom coordinate system and a device under test coordinate system 171 Annex G (informative) Validation dipoles 175 Annex H (informative) Flat
18、 phantom .179 Annex I (informative) Recommended recipes for phantom head tissue-equivalent liquids 183 Annex J (informative) Measurement of the dielectric properties of liquids and uncertainty estimation.187 Bibliography .207 SANS 62209-1:2006This s tandard may only be used and printed by approved s
19、ubscription and freemailing clients of the SABS .62209-1 IEC:2005 5 Figure 1 Picture of the phantom showing ear reference points RE and LE, mouth reference point M, reference line N-F, and central strip37 Figure 2 Sagittally bisected phantom with extended perimeter (shown placed on its side as used
20、for device SAR tests)37 Figure 3 Cross-sectional view of SAM at the reference plane containing B-M 41 Figure 4 Side view of the phantom showing relevant markings 43 Figure 5 Handset vertical and horizontal reference lines and reference points A, B on two example device types .53 Figure 6 Cheek posit
21、ion of the wireless device on the left side of SAM55 Figure 7 Tilt position of the wireless device on the left side of SAM.57 Figure 8 Block diagram of the tests to be performed .61 Figure 9 Orientation of the probe with respect to the line normal to the surface, shown at two different locations 65
22、Figure 10 Orientation and surface of the averaging volume relative to the phantom surface . 93 Figure A.1 Illustration of dimensions in Table A.1 .103 Figure A.2 Close up side view of phantom showing the ear region107 Figure A.3 Side view of the phantom showing relevant markings.109 Figure B.1 Exper
23、imental set-up for assessment of the sensitivity (conversion factor) using a vertically-oriented rectangular waveguide121 Figure B.2 Description of the antenna gain evaluation set-up 125 Figure B.3 Set-up to assess spherical isotropy deviation in tissue-equivalent liquid .131 Figure B.4 Alternative
24、set-up to assess spherical isotropy deviation in tissue-equivalent liquid133 Figure B.5 Experimental set-up for the hemispherical isotropy assessment 11 135 Figure B.6 Conventions for dipole position () and polarization ( ) 11.135 Figure B.7 Measurement of axial isotropy with a reference antenna 139
25、 Figure B.8 Measurement of hemispherical isotropy with reference antenna .139 Figure C.1 Methods of three points.145 Figure C.2 Method of the tangential face 145 Figure C.3 Method of averaging .147 Figure C.4 Extrude method of averaging.147 Figure C.5 Extrapolation of SAR data to the inner surface o
26、f the phantom based on a least-square polynomial fit of the measured data (squares)151 Figure D.1 Set-up for the system check 157 Figure F.1 Example reference coordinate system for the SAM phantom 171 Figure F.2 Example coordinate system on the device under test .173 Figure G.1 Mechanical details of
27、 the reference dipole.177 Figure H.1 Dimensions of the flat phantom set-up used for deriving the minimal dimensions for W and L 179 Figure H.2 FDTD predicted uncertainty in the 10 g peak spatial-average SAR as a function of the dimensions of the flat phantom compared with an infinite flat phantom 18
28、1 Figure J.1 Slotted line set-up189 Figure J.2 An open-ended coaxial probe with inner and outer radii a and b, respectively 193 Figure J.3 TEM line dielectric test set-up 60 .197 SANS 62209-1:2006This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS
29、 .62209-1 IEC:2005 7 Table 1 Dielectric properties of the tissue-equivalent liquid .43 Table 2 Reference SAR values in watts per kilogram used for estimating post-processing uncertainties .87 Table 3 Measurement uncertainty evaluation template for handset SAR test .95 Table A.1 Head dimensions relev
30、ant to phantom shape: SAM dimensions compared to 90th-percentile large male head from Gordon report 18 .105 Table A.2 Specific guidelines for the design of SAM phantom and CAD file .107 Table B.1 Uncertainty analysis for transfer calibration using temperature probes.119 Table B.2 Uncertainty templat
31、e for calibration using analytical field distribution inside waveguide 123 Table B.3 Uncertainty template for evaluation of reference antenna gain.127 Table B.4 Uncertainty template for calibration using reference antenna.129 Table D.1 Numerical reference SAR values for reference dipole and flat pha
32、ntom 165 Table G.1 Mechanical dimensions of the reference dipoles .175 Table H.1 Parameters used for calculation of reference SAR values in Table D.1 181 Table I.1 Suggested recipes for achieving target dielectric parameters185 Table J.1 Parameters for calculating the dielectric properties of variou
33、s reference liquids 201 Table J.2 Dielectric properties of reference liquids at 20 oC203 Table J.3 Example uncertainty template and example numerical values for dielectric constant (r) and conductivity () measurement205 SANS 62209-1:2006This s tandard may only be used and printed by approved subscri
34、ption and freemailing clients of the SABS .62209-1 IEC:2005 9 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES Part 1: Procedure to determine the specific
35、absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Commi
36、ttees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Availa
37、ble Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental orga
38、nizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical
39、matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC Nat
40、ional Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity,
41、 IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC pr
42、ovides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, empl
43、oyees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of th
44、e publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the
45、possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62209-1 has been prepared by IEC technical committee 106: Methods for the assessment of elect
46、ric, magnetic and electromagnetic fields associated with human exposure. The text of this standard is based on the following documents: FDIS Report on voting 106/84/FDIS 106/88/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the
47、above table. SANS 62209-1:2006This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .62209-1 IEC:2005 11 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publica
48、tion will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. SANS 62209-1:2006This s t
49、andard may only be used and printed by approved subscription and freemailing clients of the SABS .62209-1 IEC:2005 13 INTRODUCTION The international committees IEC TC 106, CENELEC Technical Committee TC 106x WG1, and IEEE Standards Coordinating Committee 34 (SCC34) worked together informally through common membership to ach
