SANS 9374-1-2002 Cranes - Information to be provided Part 1 General《起重机 应提供的资料 第1部分：总则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R ISO 14242-1-2012 Implants for surgery Wear of total hip-joint prostheses Part 1 Loading and displacement parameters for wear-testing machines and corresponding environmental.pdf

GOST R ISO 14242-2-2013 Implants for surgery Wear of total hip-joint prostheses Part 2 Methods of measurement《外科植入物 全髋关节假体的磨损 第2部分 测量方法》.pdf

GOST R ISO 14242-3-2013 Implants for surgery Wear of total hip-joint prostheses Part 3 Loading and displacement parameters for orbital bearing type wear testing machines and corres入.pdf

GOST R ISO 14243-1-2012 Implants for surgery Wear of total knee-joint prostheses Part 1 Loading and displacement parameters for wear-testing machines with load control and correspo.pdf

GOST R ISO 14243-2-2012 Implants for surgery Wear of total knee-joint prostheses Part 2 Methods of measurement《外科植入物 全膝关节假体的磨损 第2部分 测量方法》.pdf

GOST R ISO 14243-3-2012 Implants for surgery Wear of total knee-joint prostheses Part 3 Loading and displacement parameters for wear-testing machines with displasement control and st《外.pdf

GOST R ISO 14250-2013 Steel Metallographic characterization of duplex grain size and distribution《钢 双相的晶粒尺寸和分布的金相表征》.pdf

GOST R ISO 14420-2014 Carbonaceous materials used in the production of aluminium Prebaked anodes and shaped carbon products Determination of the coefficient of linear thermal expan.pdf

GOST R ISO 14502-1-2010 Tea Method for determination of total polyphenols content《茶类 总茶多酚含量的测定》.pdf