SFS 2958-1981 《医用纺织品 毛巾布》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 3651-2-1998 Determination of resistance to intergranular corrosion of stainless steels - Ferritic austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion.pdf

BS EN ISO 3656-2011 Animal and vegetable fats and oils Determination of ultraviolet absorbance expressed as specific UV extinction《动植物脂肪和油 测定作为特定的紫外(UV)消光表示的紫外线吸收率》.pdf

BS EN ISO 3657-2013 Animal and vegetable fats and oils Determination of saponification value《动植物脂肪和油 皂化值的测定》.pdf

BS EN ISO 3661-2010 End-suction centrifugal pumps Baseplate and installation dimensions《端吸离心泵 底座尺寸和安装尺寸规格》.pdf

BS EN ISO 3665-2013 Photography Intra-oral dental radiographic film and film packets Manufacturer specifications《摄影术 口内牙科放射线照片和胶片包 制造商规范》.pdf

BS EN ISO 3673-2-2012 Plastics Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins《塑料 环氧树脂 交联环氧树脂的试样制备和特性测量》.pdf

BS EN ISO 3677-2016 Filler metal for soldering and brazing Designation《软钎焊、钎焊填充金属 名称》.pdf

BS EN ISO 3681-1996 Binders for paints and varnishes Determination of saponification value Titrimetric method《涂料和清漆用粘合剂 皂化值测定 滴定法》.pdf

BS EN ISO 3682-1996 Binders for paints and varnishes - Determination of acid value - Titrimetric method《涂料和清漆用粘合剂 酸值测定 滴定法》.pdf