SIS SEN 01 29 10-1964 Grapbical symbols for electrical installations in buildings Electric docks time recorders transmitters《建筑物电气安装图图形符号电气化码头，时间记录发送器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D822-A4-2014 POLYAMIDE (PA) 6 HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MINIMUM 25% PCR CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B1-2014 POLYAMIDE (PA) 6 HEAT STABILIZED 40% GLASS FIBER MINERAL MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B1-2016 POLYAMIDE (PA) 6 HEAT STABILIZED 40% GLASS FIBER MINERAL MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B3-2016 POLYAMIDE 6 (PA 6) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B4-2018 POLYAMIDE 6 (PA 6) HEAT STABILIZED UV STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND MOLD IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSS-M4D823-A2-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维 矿物增强的受热稳定的聚酰胺66成型料 与.pdf

FORD WSS-M4D823-B1-2015 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS FIBER MINERAL (25% GLASS 15% MINERAL) REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D825-B1-2013 POLYPROPYLENE (PP) COPOLYMER 5% MINERAL FILLED COLOR PIGMENTED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D827-A3-1995 ABS HIGH HEAT RESISTANT HIGH IMPACT MOLDING COMPOUND《丙烯腈-丁二烯-苯乙烯共聚物（ABS）耐高温高抗冲成型料》.pdf