SIS SMS 2325-1964 Conveyors 2-roller sets for belt conveyors General dimensions《输送机，带式输送机用2滚筒装置 ，概要尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 26428-11-2012 Digital cinema (D-cinema) distribution master Additional frame rates《数字影院发行母带 附加帧频》.pdf

BS ISO 26428-19-2012 Digital cinema (D-cinema) distribution master Serial digital interface signal formatting for additional frame rates level AFR2 and level AFR4《数字影院发行母带 用于AFR2级和.pdf

BS ISO 26462-2010 Milk - Determination of lactose content - Enzymatic method using difference in pH《牛奶 乳糖含量的测定 使用不同pH值的酵素法》.pdf

BS ISO 26482-2010 Hardmetals - Determination of lead and cadmium content《硬质合金 铅和镉含量的测定》.pdf

BS ISO 26603-2017 Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of total chlorine《塑料 聚氨酯生产用芳族异氰酸盐 总氯含量的测定》.pdf

BS ISO 26622-1-2017 Modular taper interface with ball track system Dimensions and designation of shanks《带球轨系统的模块锥形接口 柄的尺寸和标注》.pdf

BS ISO 26622-2-2008 Modular taper interface with ball track system - Dimensions and designation of receivers《带球轨系统的模块锥形接口 接收器的尺寸和标注》.pdf

BS ISO 26623-1-2014 Polygonal taper interface with flange contact surface Dimensions and designation of shanks《法兰连接表面的多边锥形接口 柄的尺寸和标注》.pdf

BS ISO 26623-2-2014 Polygonal taper interface with flange contact surface Dimensions and designation of receivers《带法兰接触表面的多边锥形接口 接收器的尺寸和标注》.pdf