SIS SMS 587-1973 Finishing reamers with parallel shanks for morse and metric tapers《直柄莫氏圆锥和公制圆锥精铰刀》.pdf

相关资源

QJ 386.2-1989 直柄莫氏圆锥和公制圆锥铰刀 莫氏圆锥号0~6 公制圆锥号4~6.pdf

GB T 1139-1984 直柄莫氏圆锥和公制圆锥铰刀.pdf

QJ 386.2-1989 直柄莫氏圆锥和公制圆锥铰刀 莫氏圆锥号0～6 公制圆锥号4～6.pdf

SIS SMS 586-1973 Finishing reamers with morse taper shanks for morse and metric tapers《直柄莫氏圆锥和公制圆锥精铰刀》.pdf

猜你喜欢

JUS C A2 054-1987 Metals tests Determination of total or effective thickness of thin surface-hardened layers of steels《金属的测试 钢件薄表面总硬化层深度或有效硬化层深度的测定》.pdf

JUS C A2 055-1995 Heat treatment of ferrous metals - Forms which use as order for heat-treatment《黑色金属热处理 热处理订单表》.pdf

JUS C A3 004-1985 Micrographic determination ofthe ferrftic or austenitic grain sfzo ofsteels《钢材中铁素体或奥氏体颗粒的显微测定》.pdf

JUS C A3 005-1987 Micrographic method for assessing the distribution ofcarbides in tool and bearing steels using reference photomkirographic《用标准图谱法评定碳化物分布的显微照相法》.pdf

JUS C A3 011-1985 Steel non alloy and low alloy Determination ofdepth of decarburization《钢材、非合金及低合金 脱碳程度测定》.pdf

JUS C A3 012-1985 Testing of metals Steel Macrographic examination by sulphurprint (Baumann method)《金属检测 钢材 硫印的目视检验（鲍曼（Baumann）法）》.pdf

JUS C A3 013-1987 Determination ofcontent of non-metallic inclusions in stee Micrographic method using standarddiagrams《钢材中非金属杂质含量的测定 标准评级图显微检验法》.pdf

JUS C A3 014-1987 Macroscopic methods for assessing the content of non-metallic inclusion in vvrought steels《锻钢 非金属夹杂物含量宏观评定方法》.pdf

JUS C A3 015-1987 Macroscopic examination of steel by etching with strong mineral acids《采用浓无机酸腐蚀对钢进行宏观检验》.pdf