SIS SS 11 03 41-1983 Hardness test - Vickers test HV 0 2 to HV 100- Indirect verification of testing machines using standardized blocks《硬度试验HV 0 2 到 HV 100的维氏测试，采用标准化模块间接检定试验机》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

MSZ 4314-1962 《标准钢材刀头T形节》.pdf

MSZ 4315-1981 《焊接的U型主干铁轨》.pdf

MSZ 4316 1-1970 《焊接压力减缩器，基本概念，要求和检验》.pdf

MSZ 4316 2-1970 《焊接压力缩减器的连接元件》.pdf

MSZ 4317 3-1983 《MSZ 4317 3－83金属切割 切割表面质量检测》.pdf

MSZ 4317 4-1983 《MSZ 4317 4－83热切割金属 表面处理的火焰气割 质量和公差》.pdf

MSZ 4317 5-1983 《金属的热切割，离子切割的面质量的评价，以及工作块尺寸》.pdf

MSZ 4318 1-1987 《汽油焊合火焊工具》.pdf

MSZ 4318-1979 《焊接套件的氧气和乙炔气体》.pdf