SIS SS 3481-1983 Woodworking machines - Measurement of noise - Operating conditions for singie spindle moulding machines《木工机床 噪声测量 单轴切模机操作条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NFPA 265-2015 Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls (Effective Dat.pdf

NFPA 268-2012 Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source (Effective Date 1 2 2012)《采用辐射热源测定外墙组件易燃性的标准测试方法 生效日期.pdf

NFPA 268-2017 Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source (Effective Date 12 1 2016).pdf

NFPA 269-2012 Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling (Effective Date 1 2 2012).pdf

NFPA 269-2017 Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling (Effective Date 12 01 2016).pdf

NFPA 270-2013 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber (Effective Date 12 17 2012).pdf

NFPA 270-2018 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber (Effective Date 11 30 2017).pdf

NFPA 271-2009 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Effective Date 12 29 2008).pdf

NFPA 271-2009 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Effective Date 12 29 2008)《用耗氧型热量.pdf