SIS SS 3569-1987 Abrasive products - Taper cup wheels with diamond or cubic boron nitride - Type 11V9《磨料产品 有菱形或立方氮化硼的锥形砂轮 11V9类型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 13114-1975 Die plate without shelves for cold plastic working dies Construction and dimensions《板材冲模用无托架料板 结构及尺寸》.pdf

GOST 13115-1975 Die plates with shelves located along the width of cold plastic working dies Construction and dimensions《板材冲模用宽向带托架料的板 结构及尺寸》.pdf

GOST 13116-1975 Die plates with shelves located along the length of the die plate for cold plastic working dies Construction and dimensions《板材冲模用长向带托架的料板 结构及尺寸》.pdf

GOST 13118-1983 Guide posts smooth for cold plastic working dies Construction and dimensions《低温塑料加工模用导柱 结构和尺寸规格》.pdf

GOST 13119-1981 Die posta with flute for cold plastic working dies Construction and dimensions《低温塑料加工模用带槽导柱 结构和尺寸规格》.pdf

GOST 13120-1983 Guide bushes smooth for cold plastic working dies Construction and dimensions《板材冲模 光滑导向衬套 结构及尺寸》.pdf

GOST 13121-1983 Guide bushes with shoulders for cold plastic working dies Construction and dimensions《低温塑料加工模用带肩导套 结构和尺寸规格》.pdf

GOST 13124-1983 Diagonal post press tool sets for cold plastic working dies Construction and dimensions《带对角导柱和衬套的板材冲模用模架 结构及尺寸》.pdf

GOST 13125-1983 Rear post press tool sets for cold plastic working dies Construction and dimensions《带后导柱和衬套的板材冲模用模架 结构及尺寸》.pdf