SNI 01-7145 2-2005 Frozen intact sharks - Part 2 Raw material requirements《冷冻完整鲨鱼 第2部分：原材料需求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 42026-1-1977 Permanent magnet segments directives for selection of dimensions《永磁换向片 尺寸选择用指导性文件》.pdf

DIN 42026-2-1980 Permanent magnet segments measuring principle《永磁换向片 测量原理》.pdf

DIN 42026-4-1982 Permanent magnet segments limiting values of visible faults《永磁换向片 可见缺陷极限值》.pdf

DIN 42027-1984 Servo motors classification survey《伺服电动机 分类、概述》.pdf

DIN 42028-1-1980 Connectors with receptacles and tabs for small motors forms and dimensions《小型电动机用带插座和连接片的连接器 型式和尺寸》.pdf

DIN 42111-1-1980 Solid state switches definitions climatic test categories measuring methods and testing procedures《固态开关 定义、气候试验类型、测量方法和测试程序》.pdf

DIN 42111-2-1980 Solid state switches dimensions ratings requirements tests type A《固态开关 尺寸、额定值、要求、检验 A型》.pdf

DIN 42112-1-1986 Push-button switches with pressure point for printed boards type A (12 5 12 5) mm type B (10 10) mm dimensions ratings requirements tests《印制电路板用带压力点的按钮开关 A型(12 5×1.pdf

DIN 42115-1-1988 Membrane switches general concepts ratings requirements tests《薄膜开关 总则、概念、额定值、要求、试验》.pdf