SNI 11-1650-1989 Concrete tie-sleeper for railway rails type II《铁轨用混泥土铸件枕木 型号2》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6910-1994 数控铣床加工铝合金用二齿削平型直柄钻铣式粗加工立铣刀.d=10～30mm.pdf

HB 6911-1994 数控铣床加工铝合金用三齿削平型直柄粗加工立铣刀.d=25～45mm.pdf

HB 6912-1994 数控铣床加工铝合金用三齿削平型直柄端刃过中心粗加工立铣刀.d=25～45mm.pdf

HB 6913-1994 数控铣床加工铝合金用二齿莫氏锥柄钻铣式粗加工立铣刀.d=10～30mm.pdf

HB 6914-1994 数控铣床加工铝合金用三齿莫氏锥柄粗加工立铣刀.d=25～63mm.pdf

HB 6915-1994 数控铣床加工铝合金用三齿莫氏锥柄端刀过中心粗加工立铣刀.d=25～63mm.pdf

HB 6917-1994 四齿粗加工立铣刀用槽铣刀.用于HB 6904～6905-94 HB 6907～6908-94.D=40～63mm.pdf

HB 6918-1994 四齿粗加工立铣刀槽铣刀用样板和校对样板.检测HB 6917-94槽铣刀用.pdf

HB 6919-1994 六齿粗加工立铣刀用槽铣刀.用于HB 6906-94 HB 6909-94.D=55～75mm.pdf