SNI 19-4004-1996 Verification of static uniaxial testing machines《静态单轴试验机试验》.pdf

相关资源

GB 1589-2004 道路车辆外廓尺寸、轴荷及质量限值.doc

GB 1589-2004 道路车辆外廓尺寸、轴荷及质量限值.pdf

SL237-018-1999 土工试验规程—一个试样多级加荷三轴压缩试验.pdf

MSZ 4711 4 lap-1967 《小型铁路 金属混凝土铺设760 mm 轴荷4Mp》.pdf

GB 1589-2016 汽车、挂车及汽车列车外廓尺寸、 轴荷及质量限值.pdf

SL 237-018-1999 土工试验规程―一个试样多级加荷三轴压缩试验.pdf

GB 1589-2016 汽车、挂车及汽车列车外廓尺寸、 轴荷及质量限值.pdf

GB 1589-2016 汽车、挂车及汽车列车外廓尺寸、轴荷及质量限值.pdf

GB T 21160-2007 农用挂车 全挂车和半挂车有效载荷、垂直静态载荷和轴载荷的测定.pdf

猜你喜欢

DIN 6354-1980 Milling machine arbors with steep taper complete《精加工的大锥体铣刀轴》.pdf

DIN 6355-1980 Clamping Devices Milling Machine Arbors with Taper《夹紧装置 带锥度铣床心轴》.pdf

DIN 6357-1988 Holding arbors with taper shank 7 24 for milling cutters and face milling cutters with internal alignment《内校准的铣刀和平面铣刀的7 24锥柄的铣刀杆》.pdf

DIN 6358-1988 Milling machine arbors with taper shank 7 24 for milling cutter with longitudinal or transverse drive《带纵向或横向传动装置的铣刀的 7 24 锥形刀杆的铣床刀杆主轴》.pdf

DIN 6359-1-1996 Reduction sleeves with 7 24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1 Type A with 7 24 taper shank in acco.pdf

DIN 6359-2-1996 Reduction sleeves with 7 24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 2 Type B with 7 24 taper shank in acco.pdf

DIN 6360-1983 Milling machine arbors with 7 24 taper for milling cutters with longitudinal and transverse drive《带纵向和横向传动的铣刀用 7 24 锥度铣床刀柄》.pdf

DIN 6364-2000 Reduction sleeves with external taper shank 7 24 for morse taper shank with tightening thread《带紧定螺纹的莫氏锥柄用7 24外锥柄异径连接套管》.pdf

DIN 6366-2007 Clutch drive rings for shell end mill arbors《筒形端铣刀刀杆用离合器驱动环》.pdf