SNI 8011-2014 Cat dekoratif berbasis pelarut organik.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 10143-2006 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape《连续热浸涂覆的薄钢板和钢带 尺寸和形状公差》.pdf

BS EN 10149-1-2013 Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions《采用冷成型高屈服强度钢材制成的热轧平板产品 通用技术交货条件》.pdf

BS EN 10149-2-2013 Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for thermomechanically rolled steels《冷成型高屈服强度钢热轧制的扁平钢产.pdf

BS EN 10149-3-2013 Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for normalized or normalized rolled steels《冷成型高屈服强度钢热轧.pdf

BS EN 10151-2002 Stainless steel strip for springs - Technical delivery conditions《弹簧用不锈钢带材 交货技术条件》.pdf

BS EN 10152-2017 Electrolytically zinc coated cold rolled steel flat products for cold forming Technical delivery conditions《电镀锌冷轧钢板产品的交货技术条件》.pdf

BS EN 10160-1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)《厚度等于或大于6mm的平钢板制品的超声波检验(反射法)》.pdf

BS EN 10162-2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances《冷轧钢型材 交货技术条件 尺寸和横截面公差》.pdf

BS EN 10163-1-2004 Delivery requirements for surface condition of hot-rolled steel plates wide flats and sections - General requirements《热轧钢板材 宽扁材和型材表面条件交货要求 一般要求》.pdf