SNV 81506-1948 《铜塑性合金 铜，锡合金（锡青铜）半成品 机械属性 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST ISO 11612-2014 Occupational safety standards system Clothing for protection against heat and flame General and performance requirements《职业安全标准体系 隔热及防火服 总则和性能要求》.pdf

GOST ISO 11643-2013 Leather Tests for colour fastness Method for determination of colour fastness of small samples to solvents《皮革 色牢度试验 耐小溶剂样品的色牢度测定方法》.pdf

GOST ISO 11644-2013 Leather Method of determination of adhesion of finish《皮革 涂层牢度的测定方法》.pdf

GOST ISO 1167-1-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1 General method《流体输送用热塑性塑料.pdf

GOST ISO 1167-2-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 2 Preparation of pipe test .pdf

GOST ISO 1167-3-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3 Preparation of components.pdf

GOST ISO 1167-4-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4 Preparation of assemblies.pdf

GOST ISO 11737-1-2012 Sterilization of medical devices Microbiological methods Part 1 Estimation of population of microorganisms on products《医疗器械灭菌 微生物法 第1部分 产品上微生物数量的估计》.pdf

GOST ISO 11737-2-2011 Sterilization of medical devices Microbiological methods Part 2 Tests of sterility performed in the validation of a sterilization process《医疗器械灭菌 微生物法 第2部分 用于验.pdf