SR CEI 839-2-5-1996 Alarm systems Part 2 Requirements for intruder alarm systems Section 5-Microwave Doppler detectors for use in buildings《报警系统 第2部分：侵入报警系统要求 第5节 建筑内使用的微波多普勒探测仪》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 11900-3-2004 Tools for pressing - Ball-lock punch retainers - Type E reduced for heavy duty《冲压工具 球锁冲头固定板 用于重负荷的E型固定板》.pdf

BS ISO 11901-1-2003 Tools for pressing Gas springs General specifications《冲压工具 气压弹簧 总规范》.pdf

BS ISO 11901-2-2004 Tools for pressing - Gas springs - Specification of accessories《冲压工具 气压弹簧 附件的规范》.pdf

BS ISO 11901-3-2014 Tools for pressing Gas springs Gas spring with increased spring force and compact built height《冲压工具 气压弹簧 增加弹簧弹力和紧凑的高度的气压弹簧》.pdf

BS ISO 11901-4-2014 Tools for pressing Gas springs Gas springs with increased spring force and same built height《冲压工具 气压弹簧 具有增加弹簧力和相同结构高度的气压弹簧》.pdf

BS ISO 11903-2008 Tools for pressing - Guide pillar mountings《冲压工具 导柱安装指南》.pdf

BS ISO 11907-1-1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Guidance《塑料制品 烟雾生成 灭火废液腐蚀性的测定 第1部分 指南》.pdf

BS ISO 11907-2-1996 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Static method《塑料制品 烟雾生成 火灾流出物腐蚀性的测定 第2部分 静态法》.pdf

BS ISO 11907-3-1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Dynamic decomposition method using a travelling furnace《塑料制品 烟雾生成 灭火废液腐蚀性的测定 .pdf